Adding oVirt Host for Backup

Adding oVirt Host for Backup

oVirt VMs can be backed up using the BDRSuite Backup Server. You can simply add the source to the BDRSuite Backup Server and configure backups. Navigate to Data Sources tab -> Hypervisors -> oVirt.

When a oVirt is added to the BDRSuite Backup server, a ‘BDRSuite Delegation Service’ is automatically or manually  installed in the target machine.

Procedure to add oVirt Machine

oVirt machine has to be added before you begin configuring the backup schedule. In the Data Sources tab choose ‘Add oVirt. You will be taken to a page where you will see a message stating ‘No host added’ if you adding host for the first time.

Click on ‘Add oVirt‘ and there are two methods provided on the opening page for adding which are as follows
  1. Manual Agent Installation
  2. Automatic Agent Installation

Manual Agent Installation

Step 1: Download BDRSuite Delegation Service (BDS)

Redhat Linux(64-bit)

oVirt 4.5.X

Step 2: Backup Agent Installation on Individual Backup Hosts

Install the Agent setup file on the target host and follow the on-screen instructions for installation. Upon successful installation, the agent will automatically establish a connection to the BDRSuite Server and listed in BDRSuite server’s Data source page.

Automatic Agent Installation

This option allows you to add each host by entering their IP address and credentials.  This will automatically install ‘BDRSuite Delegation Services’ on the target host.

Add oVirt by providing ‘Hostname/IP Address and its login credentials.
Notes
Note: You can add as many oVirt into the BDRSuite Backup Server whenever required 
IP Address/DNS Name

Enter the hostname or IP address of the hostname for which you have to proceed with the backup

The Hostname can be added using FQDN(Fully qualified domain name) ie., machine_name.domain_name. You can connect your host with BDRSuite Backup Server through the following combinations in the Hostname/IP Address section:
  1. Hostname – Enter the Hostname alone
  2. Hostname@Domain name – Enter the hostname followed by @ and domain name
  3. Domain name/Hostname – Enter the domain name followed backslash (/) and the hostname
  4. 192.xxx.xxx.xxx – Enter the IP address
Notes
Note: If you have provided an invalid Hostname/IP address, the following alert message will be displayed “Unable to connect the oVirt. Please check network connection settings

Credentials
  1. You can add new credentials or select existing credentials.
  2. User Name: Enter the username of the specific host
  3. Password: The password of the host or IP Address
Port Number
  1. 42005: Port used for communication between BDRSuite Integration Service and BDRSuite Backup Server
Notes
Note: BDRSuite Backup Server communicates with the Proxmox VE using the port that is set to 42005 as default. You can modify this port number as per your port number availability.
  1. 5000: Port used for running Python Server
Notes
Note: In the 5000 port the firewall must be added and only then the VMs will be listed while configuring backup.
Hosted Engine IP Address/DNS Name

Enter the hosts IP Address/DNS Name of the machine where the database runs.

Web Console Credential

You can add new credentials or select existing credentials. Make sure they administrative privileges.

Maximum Concurrent Tasks

Specify the number of parallel backup tasks each (BDS) BDRSuite Delegation Service can process simultaneously.

Save the host after adding all the details.

The oVirt will be added to the BDRSuite Backup Server.

Edit

You can select a different credential or add a new credential.

Delete

If you want to remove a particular oVirt, click the Delete option. A pop-up window with the message “Are you sure, you want to delete the selected server or host?” will appear. Click Yes, Delete.

Report
​
The Agent information report gives you the stage-wise report of the agent installation, click the Reports icon to view the Machine Name, Version, Installed Time, Status, Remarks. Further, expand it to view the installation start and end time.


    • Related Articles

    • Prerequisites for Adding oVirt Host Data source through Automatic Agent Installation

      KB ID: 115228 Overview This article outlines the prerequisites for automatically adding an oVirt host to the BDRSuite Backup Server. Meeting these requirements ensures secure communication and enables efficient backup management of oVirt virtual ...

    • Configuring oVirt Backup

      Step 1: Adding Basic Job Details Get started by creating a backup job by choosing Job Create Option, choose to Create Job without using a template if you want to create a backup from scratch, or choose to Create Job using an existing template if you ...

    • Adding Proxmox Host for Backup

      Proxmox VE VMs can be backed up using the BDRSuite Backup Server. You can simply add the source to the BDRSuite Backup Server and configure backups. Navigate to Data Sources-> Hypervisors ->Proxmox VE. When a Proxmox VE is added to the BDRSuite ...

    • Adding KVM Host for Backup

      KVM VMs can be backed up using the BDRSuite Backup Server. You can simply add the source to the BDRSuite Backup Server and configure backups. Navigate to Data Sources tab and choose Add KVM. When a KVM machine is added to the BDRSuite Backup server, ...

    • Steps for Adding oVirt Host Data source through Manual Agent Installation

      KB ID: 115229 Overview This article provides detailed instructions to manually install the BDS agent on an oVirt host, enabling integration with the BDRSuite Backup Server for effective backup management of oVirt virtual machines. Ensuring each step ...